To maintain and extend the life of agricultural harvester V belts, follow these recommendations:
1. Working environment:
Avoid rubber track and oil, diesel, grease and other oils, as well as acid, alkali, salt, pesticides and other chemicals contact.
Try to avoid driving on sharp stones, steel bars, uneven ground, if traveling far should be transferred by transport vehicles.
2. Proper use:
After use, it should be washed in time to prevent corrosion and wear of the agricultural harvester V belts.
Sharp bends should be reduced as much as possible during driving, because sharp bends can easily cause wheel trip damage to the track, and can also cause the guide wheel or guide rail to impact the core iron and cause the core iron to fall off.
Often check the wear of the driving wheel, guide wheel, and support wheel, and replace the severely worn parts in time.
It should not be inclined to walk or walk over the bridge on the slope, friction walking on the edge of the step, forced to climb the step, these behaviors will lead to track pattern damage, core iron break, track edge cuts and other problems.
Pay attention to the adjustment of the tension of the agricultural harvester V belts, maintain the normal tension, can not be too loose or too tight, too loose tension is easy to derail the track, too tight is easy to produce large tension on the track, resulting in the extension of the track, the change of pitch, the high pressure surface in individual places, resulting in accelerated wear of the core iron and drive wheel.
3. Lubrication maintenance:
At the end of each season, clean the mud, grass and grease on the track to avoid accelerating the wear and corrosion of the track.
Check the lubricating oil condition regularly, and fill lubricating oil when necessary to keep the lubricating oil clean.
4. Storage and maintenance:
After the end of each season, clean the mud, grass and grease above the track, loosen the tensioning wheel, store it in a ventilated place to avoid light and heat, and pad wood under the track to reduce aging and corrosion.
Special attention should be paid to protection and waterproofing during transportation.
5. Check and replace:
Regularly check the wear of the agricultural harvester V belts, and timely replace the severely worn parts, such as the drive wheel, guide wheel, and support wheel.
In the process of use, if the track is found to have cracks, fractures, abnormal sounds of the steering gear and small wheels, it should be adjusted and checked in time.
Through the above measures, the service life of agricultural harvester V belts can be effectively extended and early wear and damage caused by improper use can be reduced.