
Variable Speed V Belts for Harvester Combine
Used in all types of agricultural machinery and equipments such as Harvester, Rice huller, Bailer, Loaders, Hedge cutter, Reaper and Brush cutter, Tiller etc.They are high resistance to wear & tear reduced slippage.
Manufactured to OEM specifications
- Double & Triple Wrap as per application
- Cord Type and position as per application
Tested & approved by major OEM companies
One /Two season warranty against manufacturing defects
ISO9001:2000 and ISO/TS 16949:2002 standard
APPLICATION
-John Deere Combine Belts
-New Holland Combine Belts
-Claas Combine Belts
-Laverda Combine Belts
-Massey Ferguson Combine Belts
-Deutz Fahr Combine Belts
-Fotoschritt Combine Belts
-Case (International Harvester) Combine Belts
Cross Section Dimension
| DRAWING | TYPE |
CORD WIDTH(bp)
|
TOP WIDTH(b)
|
HEIGHT(h) | ANGLE(a) |
AVAILABLE LENGTH RANGE |
|
| WRAPPED | COGGED | ||||||
|
|
HZ | 8.5 | 10.0 | 6.0 | 40° | 450~6000MM | 400~8000MM |
| HA | 11.0 | 13.0 | 8.0 | ||||
| HB | 14.0 | 17.0 | 11.0 | ||||
| HC | 19.0 | 22.0 | 14.0 | ||||
| HD | 27.0 | 32.0 | 19.0 | ||||
| DRAWING | TYPE |
CORD WIDTH (bp)
|
TOP WIDTH (b)
|
HEIGHT (h)
|
HEIGHT ABOVE
|
AVAILABLE LENGTH RANGE |
|
| WRAPPED | COGGED | ||||||
|
|
HG | 15.4 | 16.5 | 8 | 2.5 | 800-6000MM | 500-8000MM |
| HH | 19.0 | 20.4 | 10 | 3.0 | |||
| HI | 23.6 | 25.4 | 12.7 | 3.8 | |||
| HJ | 29.6 | 31.8 | 15.1 | 4.7 | |||
| HK | 35.5 | 38.1 | 17.5 | 5.7 | |||
| HL | 41.4 | 44.5 | 19.8 | 6.6 | |||
| HM | 47.3 | 50.8 | 22.2 | 7.6 | |||
| HN | 53.2 | 57.2 | 23.9 | 8.5 | |||
| HO | 59.1 | 63.5 | 25.4 | 9.5 | |||





WRAPPED MOLDED (HA, HB, HC, & HD Sections)

Wrapped Molded (H3V & SPZ, SPA, H5V & SPB, SPC Sections)

WRAPPED MOLDED (RHA, RHB, RHC, RH3V & RH5V Sections)

Double Angle (HAA, HBB, & HCC Sections)
Advantages
Rubber-fabric product ,consisting of a rubber base reinforced with a fabric cord. The inner surface for improving cooling and flexibility is predominantly dentate.Improve the performance of your combine harvester with our high-quality products.
The structure of the durable V belts are simple, the manufacturing and installation accuracy requirements are not high, and the use and maintenance are convenient. The variable speed drive belts are suitable for the occasion with large center distance between two axles.
Stable transmission, low noise and shock absorption.
In case of overload, the durable V belt will slip on the pulley, which can prevent the damage of weak parts and play a role of safety protection.
Features
- Engineered constructions for specific applications
- Designed and built to exacting specifications
- Proven performance from extensive lab and field testing
- Engineered and manufactured in ISO 9001:2015 registered facilities
- State of the art technology and materials
- Long-term durability with superior performance
EPDM VS CR/Neoprene
|
Performance Item |
EPDM |
CR |
Practical Impact |
|
Continuous Temperature Resistance |
-40℃ ~ +120℃; intermittent peak up to 150℃ |
-30℃ ~ +100℃; intermittent peak up to 120℃ |
Harvester compartment temperature often reaches 95~110℃ during operation. EPDM delivers superior thermal aging resistance; CR tends to harden and develop side cracks under prolonged high temperature. |
|
Ozone & UV Resistance |
★★★★★ Excellent (saturated main polymer chain) |
★★★★ Good, prone to surface microcracks under long-term outdoor exposure |
For field operation and outdoor storage, EPDM provides longer weathering service life. |
|
Mineral Oil / Fuel Resistance |
Poor; severe swelling when contacting engine oil, volume expansion 80~120% |
Moderate oil resistance, volume expansion 5~15% |
CR is more stable at drive positions with potential oil leakage; EPDM is preferred for positions without oil splashing. |
|
Tear Strength |
7~15 MPa |
10~20 MPa, higher tear resistance |
CR performs better against scraping by foreign debris; EPDM requires carbon black reinforced formulation to improve wear resistance. |
|
Side Wear Resistance (Core for Variable Speed Belt) |
Formulation dependent; high carbon black modified EPDM achieves outstanding wear performance |
Base CR has good wear resistance; modified formulation can control side abrasion loss |
Torque is transmitted via belt side faces. Wear performance depends on compound formulation instead of raw rubber intrinsic property. |
|
Combustion Property |
Flammable, non-self-extinguishing |
Self-extinguishing |
CR has slight flame-retardant advantage under dry straw harvesting conditions. |
|
Typical Application |
Modern high-horsepower agricultural machinery, high-temperature exposed positions without obvious oil splash |
Traditional OEM agricultural machinery, drive points with lubricant splash; CR compound is standard specification for some original RoyalVBelt models. |
Polyester VS Aramid
|
Cord Type |
Core Characteristics |
Compatibility with Harvester Working Conditions |
|
Polyester |
Cost-effective; good flex fatigue resistance; elongation increases under high temperature |
Machines with relatively stable load fluctuation; economical replacement parts; periodic re-tensioning required in field. |
|
Aramid (Kevlar) |
Ultra-low elongation, high tensile strength, excellent impact load resistance, heat resistant; higher cost |
Premium OEM option for continuous operation high-horsepower harvesters. Minimizes repeated field tension adjustment, stabilizes transmission ratio and reduces slip wear, matching 1–2 working seasons warranty requirement. |
FAQ:
Place of Origin: China
Brand Name: RoyalCorp , NTYOKOMOTO , CIC
Certification : ISO9001:2015 and ISO/TS16949
Service : OEM and ODM are both acceptable. The material, color, style can be customized. Private Logo can be discussed.
Delivery time: 15~ 45 days
Payment terms: T/T , L/C , D/P, D/A
Production Capacity: 200000pcs / month
Hot Tags: variable speed v belts for harvester combine, China, suppliers, manufacturers, factory, customized, wholesale, buy, low price, for sale, Variable Speed V Belts for Harvester Combine, Semi Feeding Harvester V Belts, Agricultural Harvester V Belts
Send Inquiry


