The service life of the rubber track on the tractor is usually between 2 and 5 years , depending on a variety of factors, including conditions of use, maintenance, etc. If not used and maintained properly, the service life of the track may be shortened .
The main factors affecting the service life of rubber track
Conditions of use : When working on flat and hard ground, the service life of the track is longer; When working in soft, sloping conditions, wear will accelerate .
Maintenance : Regular inspection and maintenance can effectively extend the service life of the track. For example, regularly changing the rotation Angle of the chain rail pin, reducing unilateral wear, adjusting the drooping amount of the track and other measures can reduce wear .
Driving mode : improper driving mode, such as partial traction, overload operation on uneven plots, will accelerate the wear of the track .
Method for extending the service life of rubber track
Correct use and maintenance : The new track should be properly rotated before use to avoid the chain pin forming a crankshaft in advance. During normal use, avoid partial traction and unilateral wear .
Regular inspection and maintenance : check the droopy amount and wear of the track regularly, and timely adjust and replace the seriously worn parts .
Adjust the droop of the track : the normal droop of the track should be 30-50mm, which should be adjusted according to the working conditions to avoid too large or too small droop .
Change side use and adjust the offset wear : when the driving wheel or track meshing parts are seriously worn, you can change side use or switch to extend the service life .
