+86-576-83366690
Variable Speed Belt Fit for Combine Harvesters Transmission Part

Variable Speed Belt Fit for Combine Harvesters Transmission Part

​RoyalCorp Variable Speed V Belts For Harvester Combine are high resistance to wear & tearReduced slippage
Manufactured to OEM specifications
- Double & Triple Wrap as per application
- Cord Type and position as per application
Tested & approved by major OEM companies
One /Two season warranty against manufacturing defects
ISO9001:2000 and ISO/TS 16949:2002 standard
Send Inquiry
Product Details of Variable Speed Belt Fit for Combine Harvesters Transmission Part

Product Introduction

Our company provides novel, high quality and efficient Rubber Track, Double Tooth Synchronous Belts, Lawn Mower Poly V Belts and excellent and standardized services under the international quality management system. We carry out market segmentation, define our brand positioning, build our brand culture and accumulate brand connotation. We adhere to the innovation-driven development strategy and have achieved a number of core key technology breakthroughs. We will encounter more challenges on the road of future development, but we firmly believe that every challenge is an opportunity for us to improve ourselves!

APPLICATION

-John Deere Combine Belts
-New Holland Combine Belts
-Claas Combine Belts
-Laverda Combine Belts
-Massey Ferguson Combine Belts
-Deutz Fahr Combine Belts
-Fotoschritt Combine Belts
-Case (International Harvester) Combine Belts

 

Cross Section Dimension

DRAWING TYPE

CORD

WIDTH(bp)

 

TOP

WIDTH(b)

 

HEIGHT(h) ANGLE(a)

AVAILABLE

LENGTH RANGE

WRAPPED COGGED

2

HZ 8.5 10.0 6.0 40° 450~6000MM 400~8000MM
HA 11.0 13.0 8.0
HB 14.0 17.0 11.0
HC 19.0 22.0 14.0
HD 27.0 32.0 19.0

 

DRAWING TYPE

CORD

WIDTH

(bp)

 

TOP

WIDTH

(b)

 

HEIGHT

(h)

 

HEIGHT

ABOVE
PITCH(B)

 

AVAILABLE

LENGTH RANGE

WRAPPED COGGED

11

HG 15.4 16.5 8 2.5 800-6000MM 500-8000MM
HH 19.0 20.4 10 3.0
HI 23.6 25.4 12.7 3.8
HJ 29.6 31.8 15.1 4.7
HK 35.5 38.1 17.5 5.7
HL 41.4 44.5 19.8 6.6
HM 47.3 50.8 22.2 7.6
HN 53.2 57.2 23.9 8.5
HO 59.1 63.5 25.4 9.5

product-1-1          product-1-1

 

 

 

 

product-1-1product-302-426product-316-411

 

 

 

 

1

WRAPPED MOLDED (HA, HB, HC, & HD Sections)

 

2

Wrapped Molded (H3V & SPZ, SPA, H5V & SPB, SPC Sections)

3

WRAPPED MOLDED (RHA, RHB, RHC, RH3V & RH5V Sections)

4

Double Angle (HAA, HBB, & HCC Sections)

 

Advantages

Rubber-fabric product ,consisting of a rubber base reinforced with a fabric cord. The inner surface for improving cooling and flexibility is predominantly dentate.Improve the performance of your combine harvester with our high-quality products.

The structure of the durable V belts are simple, the manufacturing and installation accuracy requirements are not high, and the use and maintenance are convenient. The variable speed drive belts are suitable for the occasion with large center distance between two axles.
Stable transmission, low noise and shock absorption.
In case of overload, the durable V belt will slip on the pulley, which can prevent the damage of weak parts and play a role of safety protection.

 

Features 
- Engineered constructions for specific applications
- Designed and built to exacting specifications
- Proven performance from extensive lab and field testing
- Engineered and manufactured in ISO 9001:2015 registered facilities
- State of the art technology and materials
- Long-term durability with superior performance

 

EPDM VS CR/Neoprene

Performance Item

EPDM

CR

Practical Impact

Continuous Temperature Resistance

-40℃ ~ +120℃; intermittent peak up to 150℃

-30℃ ~ +100℃; intermittent peak up to 120℃

Harvester compartment temperature often reaches 95~110℃ during operation. EPDM delivers superior thermal aging resistance; CR tends to harden and develop side cracks under prolonged high temperature.

Ozone & UV Resistance

★★★★★

Excellent (saturated main polymer chain)

★★★★

Good, prone to surface microcracks under long-term outdoor exposure

For field operation and outdoor storage, EPDM provides longer weathering service life.

Mineral Oil / Fuel Resistance

Poor; severe swelling when contacting engine oil, volume expansion 80~120%

Moderate oil resistance, volume expansion 5~15%

CR is more stable at drive positions with potential oil leakage; EPDM is preferred for positions without oil splashing.

Tear Strength

7~15 MPa

10~20 MPa, higher tear resistance

CR performs better against scraping by foreign debris; EPDM requires carbon black reinforced formulation to improve wear resistance.

Side Wear Resistance (Core for Variable Speed Belt)

Formulation dependent; high carbon black modified EPDM achieves outstanding wear performance

Base CR has good wear resistance; modified formulation can control side abrasion loss

Torque is transmitted via belt side faces. Wear performance depends on compound formulation instead of raw rubber intrinsic property.

Combustion Property

Flammable, non-self-extinguishing

Self-extinguishing

CR has slight flame-retardant advantage under dry straw harvesting conditions.

Typical Application

Modern high-horsepower agricultural machinery, high-temperature exposed positions without obvious oil splash

Traditional OEM agricultural machinery, drive points with lubricant splash; CR compound is standard specification for some original RoyalVBelt models.

 

 

Polyester VS Aramid

Cord Type

Core Characteristics

Compatibility with Harvester Working Conditions

Polyester

Cost-effective; good flex fatigue resistance; elongation increases under high temperature

Machines with relatively stable load fluctuation; economical replacement parts; periodic re-tensioning required in field.

Aramid (Kevlar)

Ultra-low elongation, high tensile strength, excellent impact load resistance, heat resistant; higher cost

Premium OEM option for continuous operation high-horsepower harvesters. Minimizes repeated field tension adjustment, stabilizes transmission ratio and reduces slip wear, matching 1–2 working seasons warranty requirement.

 

FAQ:

Place of Origin: China

Brand Name: RoyalCorp , NTYOKOMOTO , CIC

Certification : ISO9001:2015 and ISO/TS16949

Service : OEM and ODM are both acceptable. The material, color, style can be customized. Private Logo can be discussed.

Delivery time: 15~ 45 days

Payment terms: T/T , L/C , D/P, D/A

Production Capacity: 200000pcs / month

Our company is willing to work together with colleagues from all walks of life to jointly devote ourselves to Variable Speed Belt Fit for Combine Harvesters Transmission Part market development of products and make concerted efforts. Our company will serve all sectors of the society wholeheartedly with first-class reputation, fast delivery time, warm and meticulous service, fair and reasonable price. Our eternal goal is to create the greatest value for our customers by exploring demand, integrating resources, and continuing innovation.

Hot Tags: variable speed v belts for harvester combine, China, suppliers, manufacturers, factory, customized, wholesale, buy, low price, for sale, Raw Edge Cogged Banded V Belts, Micro Ribbed Poly V Belts, Rubber Track for Snowmobile, Special Designed Polyurethane Synchronous Belts, STS Synchronous Belts, Variable Speed V Belts

[[ProKeywords]]

SPEC DATA

Send Inquiry

Send a Message